Compiling Mup for UNIX
- Compiling Mup for UNIX
Mup has been compiled successfully on a wide variety of
UNIX-type systems, including Linux, UNIX SV_R4, and Solaris.
We cannot guarantee that it will work on your system, but it
generally ports with no more than minimal changes.
Download the mup53src.tar.gz Mup source package file and
unpack it:
gunzip mup53src.tar.gz
tar xf mup53src.tar
Alternately, you can download the RPM format Mup source
package and install it as you would any RPM package:
rpm -i mup-5.3-0.src.rpm
Installing the source package will create a mup-5.3
directory. Go to that directory.
cd mup-5.3
There is a simple makefile provided, which should work on
most systems, so all you need to do is:
make install
You can edit the makefile if necessary for your environment.
Comments at the top of the makefile describe suggested
modifications if it doesn't work for you as is. Note that
if you want to install in a system directory (like the
default location /usr/bin) you will need to be root for the
installation step. Otherwise building Mup requires no
special privileges.
If for some reason the makefile doesn't work, you can
compile Mup and any of the optional utility programs
(mupdisp, mkmupfnt, and mupmate) manually. For compling Mup
itself, generally, something like the following will work:
cd mup
cc -o mup *.c -lm
For most UNIX-like compilers, the "-o mup" will cause the
program to be put into a file called "mup," and the "-lm"
will cause the math library to be included (That's a lower-
case letter "el" not a one). You may also want to use other
options. For example, for many compilers "-O" (that's a
capital letter "oh" not a zero) will run the optimizer, and
"-s" will strip the resulting program to save disk space.
Copy mup into your $HOME/bin or a similar directory in your
$PATH.
cp mup $HOME/bin/mup
If you already have a means of displaying PostScript files,
such as gv, ghostview, or pageview, you can simply pipe the
output of Mup into your display program. Or you can use the
mupdisp program in connection with Ghostscript, which is
free. You can download Ghostscript from
http://www.cs.wisc.edu/~ghost, or
http://www.ghostscript.com/. We've found that on some
systems, Ghostscript compiles with lots of warnings, but it
works okay anyway.
Once you have installed Ghostscript, compile the mupdisp
program for displaying Mup output on screen. See the comment
at the top of mupdisp.c for suggestions on compiler options
to try.
Copy mupdisp into your $HOME/bin or similar directory.
cp mupdisp $HOME/bin/mupdisp
The mupdisp program works on the AT386 $TERM type under UNIX
x86 or under X-windows. If you have a different display
type, you may need to write your own display functions. In
most cases, you'll only need to write 6 short functions, and
you can use the examples in at386.c, dos.c, or xterm.c for a
general template of the functions. You will also need to
update dispttyp.h and init.c appropriately.
If you want to supply your own fonts to override the
standard Mup fonts, you can compile the mkmupfnt program:
cd mkmupfnt cc -o mkmupfnt mkmupfnt.c
The Mupmate program provide a menu-driven interface on top
of Mup. It is built on top of the FLTK library, so you will
need to have the FLTK development package. You can get this
from http://www.fltk.org Get the latest version in the 1.1.x
series (we built with 1.1.7); don't get from the 2.x series.
Mupmate is written in C++, so you will need a C++ compiler,
such as g++. See the top level makefile for typical
compilation options. FLTK normally comes with its own copies
of libjpg, libpng, and libz (compression) libraries, but it
will usually work with the generic versions of those
libraries as well. You will also need standard X-windows
libraries: libX11, libXext, and libXpm.
A shell script called "mupprnt" is included for printing Mup
files using Ghostscript. Copy mupprnt to your $HOME/bin or
other appropriate directory.
cp mupprnt $HOME/bin/mupprnt
You will need to set the GS_DEVICE shell variable to the
proper value for your printer. If you don't know what to set
it to, the comment at the top of mupprnt may help, or check
your Ghostscript documentation. You could also just use the
print option on your PostScript viewer such as gv.
Once you have everything installed, you can remove the .tar
file if you wish, to free up disk space.
rm mup53src.tar
Please let us know if you need any workarounds for compiling
on your system. We want to try to make Mup as portable as
possible.
2. Getting Mup running for the first time
Once you get Mup to compile successfully, try running it.
The first time you run Mup, it should give you a message
indicating Mup is shareware, and asking you to read the Mup
license agreement. It will then tell you to create a
particular file. By creating this file, you agree to abide
by the Mup license, and Mup will be turned on for normal
operation.
Try running Mup on the sample input files (sample.mup and
star.mup ). Verify that the output you get matches the
corresponding sample output files (sample.ps and star.ps ).
You will find differences in some of the numbers, comments,
timestamp, filenames, etc, but otherwise, in general the
PostScript output you get should be similar to the sample
output files provided, and if you display them, the results
should look pretty much identical.
If Mup fails to run properly on the sample files, either
your system has uncovered a bug that we haven't seen yet or
your machine has some incompatibility. You can turn on
debugging, by running with the -dN option, where N is a
bitmap of debugging flags, to help pinpoint where bugs may
be. The Mup User's Guide explains the bits of the debugging
flags. If you get stuck, you may contact us at
support@arkkra.com and we will try to help.
If you need to make any changes in order to get Mup to
compile and run successfully, please let us know. If you
find anything confusing, we'd like to know that too. We
want Mup to be as solid, portable, useful, and easy to use
as possible.
Also, please let us know if there are ways we can improve
the Mup documentation.
If you receive messages beginning with "internal error" this
usually indicates a program bug, so we'd like to know about
them. An exception is when you get a message about being
unable to allocate memory when there really isn't any memory
left. If you get other internal errors, please send us a
copy of an input file and any other information that may
help us reproduce the problem, so we can try to fix it in
the next Mup release.
Mup is shareware. Once you get Mup up and running, you can
try it out for free to decide whether you want to use it or
not. If you like it, execute
mup -r
to get a copy of the shareware registration form. The
registration fee is $29. See the license file for license
details.
Provide feedback (bugs reports, comments, suggestions,
questions) to: support@arkkra.com
--------------------------------------------------
Arkkra Enterprises