Back to files

XView Surround Version 0.93

This is XView Surround, a tool to control the miroMEDIA Surround Dolby Pro Logic decoder. It is designed to run under Linux with X11 and XView3.2. It comes with an easy-to-use, attractive OPEN LOOK graphical interface. It acts as a frontend for SRND, the Linux device driver for the miroMEDIA Surround board.

For the latest version of this frontend and the SRND driver take a look at:

http://www.tu-bs.de/~y0000441/srnd_e.html

NOTE: The XView Surround software was NOT published by miro so don't send

questions, comments or bug-reports to miro but to me:

Oliver Gantz (o.gantz@tu-bs.de)

Hardware Requirements

The miroMEDIA Surround ISA PnP Dolby Pro Logic decoder board.
A soundcard properly installed and working if you connected your miroMEDIA Surround board to your sound card as recommended.
A sound source with Surround sound. (e.g. Audio CD, stereo TV tuner board)

Software Requirements

Linux 2.x.x XView Surround was build and tested with kernel version 2.0.35 and 2.1.123 but should work with other kernel versions, too.
XView3.2 libraries and header files XView Surround was build and tested with XView3.2p1-X11R6, Linux-patchlevel 2.
SRND Version 0.94 or better - the device driver for the miroMEDIA Surround board.

See INSTALL for further information.

Credits

Many thanks to miroMEDIA GmbH, Braunschweig for sending me programming information for the miroMEDIA Surround board.

Legal Information

3D-Phonic(R) is a registered trademark of VICTOR COMPANY OF JAPAN, LIMITED. DOLBY and PRO LOGIC are trademarks of Dolby Laboratories Licensing Corporation. miro(R) is a registered trademark of miro Computer Products AG. OPEN LOOK(R) is a registered trademark of Novell, Inc.

XView Surround is free software and is distributed under the terms of the GNU General Public License. See COPYING for further information.